Blog

Nexus® Solid Reference Industrial pH Sensors The Nexus® polymer reference electrode comprises an electrolyte chamber that is entirely made of a KCI infused plastic material. The KCl is embedded within the material,  as such this is no need for an additional liquid junction connection of the diaphragm. As a result, the polymer that has been […]

It is imperative for accurate pH measurement that a well-defined electrical connection between the medium being measured (the process liquid) and the pH meter is represented by the reference electrode located within the meter. Because the accuracy of the pH measurement is dependent on the reference electrode, reference electrode selection is of critical significance. An […]

A Paddle Wheel Flow Meter is a device used to measure the flow rate of a liquid or a gas in a pipe. The technology behind this type of flow meter is based on the principle of an impeller rotating in a fluid stream. The meter can measure different types of liquids including water, chemicals, […]

The paddle wheel rotor, body, and display/controller make up the basic components of paddle wheel flow meters. Paddle wheel flow meters measure fluid volume and volumetric flow. The paddle wheel sensor is made up of a roto or impeller that can freely revolve around a rotor pin. The rotor or paddle has magnets embedded into […]

Telemetry for mini bulk or bulk chemical tanks is a wireless system that controls data about liquid containers in remote, unstaffed areas where connecting data lines would be too hard or expensive. Some of the places in these areas are oil refineries and places that store chemicals. A typical Tank Telemetry monitoring solution uses cellular […]

Bulk tank or small bulk telemetry system is a wireless platform that handles liquid container data in remote, unstaffed places where connecting data lines would be difficult or costly. Included in these regions are oil refineries and chemical storage facilities. A typical Tank Telemetry monitoring solution offers cellular connectivity that connects liquid-level sensors installed in […]

Small mini bulk or larger bulk tank telemetry is a wireless system that manages liquid container data at unmanned, remote locations where connecting data lines would be too challenging or expensive. These regions include locations like chemical storage facilities and oil refineries. A typical Tank Telemetry monitoring system offers cellular connectivity, which connects liquid-level sensors […]

Bulk tank or mini bulk telemetry is a wireless system that controls liquid container data in remote, unstaffed areas where it would be too difficult or expensive to connect data lines. These areas include places like oil refineries and chemical storage facilities. A typical Tank Telemetry monitoring solution provides cellular connectivity, which links liquid-level sensors […]

Leak detection cable is a vital component in ensuring the protection of data centers, particularly hyperscale data centers. These data centers have large amounts of computing equipment that require constant cooling to prevent damage and ensure seamless operation. In the event of a leak, the leak detection cable can quickly detect the presence of liquids, […]

Leak detection cable works by detecting the presence of liquids (e.g. water) that may cause damage to the equipment in a data center. The leak detection cable is designed to detect the presence of liquids and send an alarm signal to the LeakAlert audible visual alarm in the event of a leak. Hyperscale data centers […]