Conductivity Controllers

Direct sensor to controller – No Preamp required

Ready. Set. GO!

  • Sensor Quick-Grip – Wire Connector Combo – No Tools Required
  • Pair Sensor with SimplCal® Calibration
  • 400 Days of Sensor Data Logging/Trending
  • Panel  |  Wall  |  Pipe Mount

Conductivity Controllers
Items300 Series400 Series
500 Series
700 / 950 Series
U900 Series
Range — Conductivity
0 – 500ms/cm0 – 500ms/cm0 – 500ms/cm0 – 500ms/cm0 – 400ms/cm
Range — Resistivity
0 – 18.25MΩ /cm0 – 18.25MΩ /cm0 – 18.25MΩ /cm0 – 18.25MΩ /cm0 – 18.25MΩ /cm
Range — TDS0 – 250g/L0 – 250g/L
0 – 250g/L
0 – 250g/L0 – 250g/L
Range — Salinity
0 – 700ppt0 – 700ppt
0 – 700ppt
0 – 700ppt0 – 400mg/L
Temperature Compensation
Automatic or ManualAutomatic or ManualAutomatic or ManualAutomatic or ManualAutomatic or Manual
Output Current2 x 4 – 20mA | 20 - 4mA | 0 - 20mA 2 x 4 – 20mA | 20 - 4mA | 0 - 20mA2 x 4 – 20mA | 20 - 4mA | 0 - 20mA2 x 4 – 20mA | 20 - 4mA | 0 - 20mA2 x 4 – 20mA | 20 - 4mA | 0 - 20mA
Communication OutputRS485 Modbus RTU
RS485 Modbus RTURS485 Modbus RTURS485 Modbus RTURS485 Modbus RTU
Data Recording-
-
Data Recording/Trend Chart Display
Data Recording/Trend Chart DisplayData Recording/Trend Chart Display
Relay Control ContactTwo (2) Relays: 3A Outputs
Two (2) Relays: 3A OutputsThree (3) Relays: 5A Outputs
Three (3) Relays: 5A Outputs
Three (3) Relays: 5A Outputs
Optional Power Supply85 – 265VAC or 9 – 36VDC85 – 265VAC or 9 – 36VDC85 – 265VAC or 9 – 36VDC85 – 265VAC or 9 – 36VDC85 – 265VAC or 9 – 36VDC
Protection GradeIP65 (Std) | NEMA4XIP65 (Std) | NEMA4XIP65 (Std) | NEMA4XIP66 (Std) | NEMA 4XIP66 (Std) | NEMA 4X
Installation
 Panel | Wall | Pipe MountPanel | Wall | Pipe Mount Panel | Wall | Pipe MountWall MountWall Mount
READ MORE
 READ MOREREAD MOREREAD MOREREAD MORE